This tells you exactly how many hours you’ve used your MacBook and how much battery life is left

All batteries deteriorate over time. iPhones or Macbooks can lose 15% of their charge capacity after the first two years, but this is only an estimate: if you know and make the best use of the cycles and control the loading times, you can minimize this degradation.

With a few best practices, you can ensure your devices last longer. This article tells you where to check the status of the battery and how to tell if everything is fine or if you should think about changing the battery.

Here’s how to know your MacBook’s hours and charging habits

First, let’s check where you can see the battery status of your devices:

1. walk in’system settings‘ from your MacBook.
2. Now go to the section “battery‘. Here you can see the health of the battery, in addition to other aspects such as: B. a graph of the last charges – with the icon of a lightning bolt in green – you can see which applications are the most energy-intensive and you can choose between three different options for energy consumption: low consumption, automatic or high consumption.

To improve charging habits, it is important not to abuse the charger: the habit of always leaving the devices connected degrades the system, that’s a certainty. However, if this is the case, it is imperative to enable the “Optimized battery charging‘, inside the section ‘battery condition‘. This feature “learns from your daily charging habits to fill the battery up to 80% and complete charging before unplugging it.” In short, an option that avoids the stress of always having power on.

In this chart you can see the hours of energy consumption, the hours the device was charged or the screen time per hour during the last 24-hour cycle. In addition to accessing the usage panel for the last 10 days – Power consumption and screen-on usage, except sleep mode.

How to find out the battery life of your MacBook

Now, on a deeper level, let’s review how your MacBook’s battery is behaving. As stated by Apple, this is the way to go:

1. Click the Apple icon in the top left corner
2. Now select the option “system settings‘
3. Now select the “General” option and scroll down where “system report‘. You can also open this option directly by searching for it in Spotlight or via “Utilities‘.
4. A new window is opening up. Select the section ‘Hardware‘.
5. In this section, look for the section “Feed‘. Please note that this section is only available for portable systems, any Macbook Air or Pro, not iMac or Mac Studio.
6. In this section you can see some very relevant numbers such as: B. the number of cycles, the condition of the battery and its maximum capacityIn addition to checking the state of charge or serial number, it is important to let you know if a repair or warranty change is required.

These cycles determine when the battery begins to fail. To estimate the life of your MacBook’s battery, all you need to know is how many cycles it has.

Yes indeed, Each complete cycle is counted from a discharge point of less than 20% and a charge point of more than 80%.. And to check if the system is charging properly, you should not only look at the official cable’s charging LED, but also at the battery icon, which changes to show a lightning bolt crossing the battery icon.

How many charge cycles does a MacBook Pro have?

However, it depends on the model. The vast majority of MacBook Pro and MacBook Air can easily reach 1,000 charge cycles at 100%. This corresponds to a recurring use of at least three years. From here the carrying capacity gradually decreases. Luckily, the charging process in Ventura is optimized in such a way that your Mac laptop battery is most likely not going to start degrading until after the first six years of use.

In Applesphere | Everything you need to know before changing your iPhone battery