These are the most common devices that cause unnecessary spending

Although power strips are a very useful solution to be able to connect a wide variety of devices in places where there are no plugs, the reality is that they accustom us to bad practices. Having multiple connections to be able to connect all types of devices and devices at the same time Generate overheating and even trigger the consumption of light.

All of these chargers with the pilot light on create a residual electricity bill that affects the bill and ultimately increases our monthly bills. But fortunately there are alternatives. Also, cheap power strips don’t have surge protection or electrical overload spikes, so they can burn out devices’ power supplies.

In the following article we analyze which devices are not recommended to be connected to a power strip and instead to a direct socket due to their energy consumption. And as they say If you don’t use it, unplug it.

Devices that are not recommended to be plugged into a power strip

According to an article on website 20 Minutes, there appear to be some devices that shouldn’t be plugged into a power strip. These are:

• radiators or heaters
• fridge, freezer or refrigerator
• air conditioners
• microwave
• Oven
• Toaster
• coffee machine
• iron
• flat iron
• hair dryer

They all have one bond in common and that is them Household appliances that convert energy into cold or heat, with high-performance motors (measured in watts). A simple hair dryer alone, for example, has an output of around 2000 W and can reach costs of 0.2 euros per hour – if used for 30 minutes a day, for example, we are talking about almost 37 euros per year – .

In most households, it is sufficient to connect three devices of this type to the same power strip You exceed the limit and the difference or PIA associated with the section of your home is skipped where the strip is connected.

How to avoid phantom spending

Another problem, however, is phantom power, the cost of electricity that comes from having the chargers and plugs plugged into a power strip. Electrical chargers will not turn off if left plugged in. Its circuit is not completely separate and they spend a minimum, but noticeable.

Yes, that’s only a few cents, but they create an environmental impact that we could save ourselves and, by the way, these cents also on our bill. And to avoid this, it is advisable to use smart plugs You can disconnect your iPhone to nip this phantom spending in the bud.

For example, Meross WiFi plugs are compatible with Apple HomeKit and Siri Works with any Wi-Fi router, on both the 5GHz and 2.4GHz bandsin addition to compatibility with iWatch and any device equipped with the operating system iOS 13 or higher.

Currently, this manufacturer has different options, the simple connector for less than 20 euros or a two-pack for less than 40 euros. own

In summary, this is the best way to control this completely unnecessary residual consumption. After purchasing one of the smart sockets that best suits your needs, follow these steps to manage it with your iPhone:

• Go into the app’Home‘.
• Now tap ‘Add accessories‘
• You can use the iPhone’s built-in camera to scan the QR or the eight-digit HomeKit code. If you have problems with validation, exit the camera application and try again.
• Once it appears on the screen, all you have to do is press ‘Add the accessory to the network‘ and tap ‘Allow‘.
• Name the device, associate it with the room where you will use it, you accept the changes and you’re done.
• From now on you can control it with your voice, every time you say: ‘Hello Siri‘ followed by ‘switch on’ or ‘switch off’ the relevant smart plug.